Workstation for Firearms Examination Regula 7517
Mobile Kit for In-Field Firearms Examination
Intended Objects for Examination
Highlighted Features
Nondestructive examination
Visualization of the relief and structural inhomogeneity of metal surfaces with magnetic properties without removing the lacquer and paint coating.
Hardcore cases
The workstation allows to go even deeper in the layer of the corroded and grinded surface. Other existing examination methods do not provide such complex investigations.
Rapid on-site examinations
Regula 7517 is time saving solution which not only provides you with the processed results in a minute but also makes it possible to perform 8 hours of nonstop examinations in field.
Additional equipment
Peripherals Regula 7516 (supplied optionally) can be used either as a separate device for non-/destructive examination of metal surface, or together with Regula 7517 expanding functionality of the latter.
Portability and operability
Regula 7517 is constructed in a protective case. There are three options of power supply sources: internal PC battery, external PC power supply source, converting AC voltage of 110–240 V into DC voltage of PC power supply, and external PC power supply source, converting DC voltage of the vehicle on-board system (nominal value — 12/24/48 V) into DC voltage of PC power supply.
Examples of Examination
Efficient Solution for a Variety of Sectors
Specifications
Does not constitute а public offer
Magneto-optical device Regula 7517A
USB device for magneto-optical visualization
- examined object material — ferromagnetic
- magnetic tape width — 25.4 and 12.6 mm
- connection interface — USB port
- dimensions — 240×110×110 mm
- weight — max 3.2 kg
Magnetic copying accessories set
- magnetic tape length — 250 mm
- dimensions — 120×80×40 mm
- weight — max 0.4 kg
Eddy-current magnetographing device Regula 7517B
Scanning speed
dynamic scanners — 0.05 m/s
Effective magnetographing width
- static scanners — max 17 mm
- dynamic scanners — max 20 mm
Magnetographing current
- static scanners — max 1500 A
- dynamic scanners — max 150 A
Nonflatness of examined surface
- static scanners — max 2 mm
- dynamic scanners — max 0.5 mm
Dimensions
- static scanners — 30×45×75 mm
- dynamic scanners — 28×30×35 mm
- controller — 160×100×30 mm
- power adapter — 100×80×30 mm
Weight
max 3.5 kg
Controller power supply
12/1 V/A
Magnetizing equipment Regula 7517C
Type of permanent magnets
Fe-Nd-B alloy
Pole distance
- magnetizing desk — 0–330 mm
- magnetizing bracket — 0–270 mm
- magnetizing plank — 20–40 mm
Pull out force (when the pole distance is maximum)
- magnetizing desk — 120 N
- magnetizing bracket — 40 N
- magnetizing plank — 60 N
Magnetic field strength in the middle of a 40 mm air gap (tangential component)
- magnetizing desk — 200 A/cm
- magnetizing bracket — 180 A/cm
- magnetizing plank — 190 A/cm
Dimensions
- in a plastic case — 460×370×180 mm
- in the operating mode — 380×200×120 mm
Weight
- in a plastic case — 7.8 kg
- in the operating mode — 4.5 kg
Magnetization indicator Regula 7517D
Magnetization indicator Regula 7517D is designed for analysing magnitude of the stray field above the surface of a magnetized object in the area of performing magnetography (e.g. when magnetically copying the metal structure of a license plate).
Delivery set
Magneto-optical device Regula 7517A
Eddy-current magnetographing device Regula 7517B
Magnetizing equipment Regula 7517C
NUCA software
Magnetic tape
- 10m of metal tape 25.4 mm
- 10m plastic tape 25.4 mm
- 5m plastic tape 12.6 mm
Laptop
optionally — model is selected at customer’s request
Peripherals Regula 7516
optionally
